Gives you high definition echo presentation of fish targets

The FURUNO FCV-620 is a high performance, dual-frequency color digital echo sounder (50 and 200 kHz) with high transmission output power of 600 Watts. It has been designed specifically with small fishing and recreational boats in mind. Furuno's 50+ years of proven marine electronics technology is incorporated into this compact, waterproof unit.

Digital Signal Processing Technology
One of the main features of the FCV-620 is the revolutionary digital filter. Our enhanced DSP (Digital Signal Processing) technology helps adjust gain, STC and output power as well as suppresses main bang (echoes just below transducer). The utilization of the DSP technology facilitates outstanding detection both in shallow and deep water. Shallow water detection is enhanced by its fast transmission rate of 3,000 times per minute at the water depth of 5 meters. This will help you identify bait pods and individual fish targets right under the boat.

Furuno Echo Sounder Operation Modes
There are four basic operation modes: Single-Frequency (50 or 200 kHz), Dual-Frequency, Zoom (Marker Zoom/Bottom Zoom/Bottom-Lock) and NAV data. For simplified operation, an Auto mode is also provided. There are two types of Auto Modes available: Cruising and Fishing. Each mode fully utilizes the DSP technology to obtain optimum echo image for each purpose. When interfaced with a GPS sensor and speed sensor, the own ship's position and own ship's speed can be confirmed on the screen. Target Lat/Lon (TLL) of favorite fishing spots can be transferred to the interfaced GPS plotter for use on your next fishing trip. The FCV-620 employs a 5.6" color LCD (TFT) screen for vivid display and wide viewing angle. Its new unit design concept allows the display unit to swivel around when desktop mounted. Also, a quick release bracket makes flush mount installation quick and simple.

FURUNO FCV620 Colour Fish Finder Features:

• Enhanced digital filter delivers comprehensive detection in both shallow and deep water
  
• The main bang (echo just below the transducer) is suppressed to less than 40 cm so that the fish echoes below the transducer can easily be observed
  
• Two types of Auto Modes available: Cruising and Fishing
  
• Fast pulse transmission rate to achieve outstanding shallow water echo presentation
  
• Dual frequency 50/200 kHz
  
• High output power of 600 W
  
• TLL output for an interfaced GPS plotter display
  
• 5.6" sunlight viewable bright 256 color LCD with a wide viewing angle
  
• Echo presentation in 8/16/64 color gradation
  
• Customized NAV data display when interfaced with appropriate sensors
  
• New cosmetic design allows the display unit to swivel around when table-top mounted
  
• Easy to flush mount
  
• Easy to operate with two rotary knobs for gain control
  and mode selection
  
• Audio-visual alarms for water depth, fish echoes and water temperature

FURUNO FCV620 Colour Fish Finder Specifications:

General

• Frequency: 50 and 200 kHz
  
• Output Power: 600 W

Display

• Display Type: 5.6" color LCD
  
• Effective Display Area: 84.7 (W) x 113.3 (H) mm
  
• 240 x 320 pixels
  
• Display Mode: Single frequency (high/low freq.), Dualfrequency, Zoom, Nav data-1/2, A-scope, Marker zoom, Bottom zoom, Bottom-lock
  
• Basic Range: 2-800 m
  
• Range Phasing: up to 800 m
  
• Expansion Range 2-800 m (Sectional expansion); 3-10 m (Bottom-lock expansion)
  
• Picture Advance Speed 8 steps: stop, 1/16, 1/8, 1/4, 1/2, 1/1, 2/1, 4/1
  
• Pulselength & PRR: 0.1-3 ms, Max 3,000 pulse/min
  
• Interface: RMA, RMB, RMC, BWC, GLL, GGA, MWV, VTG, VHW, MTW, XTE, MDA, HDT, HDG, RMA*, RMB*, RMC*, BWC*, GLL*, GGA*, MWV*, VTG*, VHW*, MTW*, XTE*, MDA*, HDT*, DBT, DPT, MTW**, VHW**, TLL*, HDG* (*: GPS sensor required; **: Speed/temperature sensor is required)

Environment

• 15C to +50˚C
  
• Waterproofing IEC: IP55

Power Supply

• 12-24 VDC: 0.8-0.4 A

AIRMAR Transducer options with this unit

Did you know that the transducer used with a fish finder is just as important as the fish finder itself?

The transducer is the 'eyes' and 'ears' when it comes to fish finder performance. At Marine Deals we believe that it's vital that a quality transducer is used to maximize fish finder picture clarity and accuracy. That's why we provide the option to choose an AIRMAR transducer with this unit (and not only the standard Lowrance transducer range).

Why Airmar?

AIRMAR is recognized as a world leader in fish finder transducer technology and have developed some of the highest quality transducers available today. Airmar transducers feature ceramic or multi-ceramic elements, which are the most effective element material for transmitting and receiving the sonar signal underneath the water. An Airmar transducer will improve definition , fish detection and deep water performance.

Please click on the links below, to get a closer look at each transducer options available for this unit.

Transom Mount Transducers for Furuno 10 Pin Plug (for trailer boats)

• Airmar P66 - 50/200KHz includes water temperature and speed. Large ceramic element produces focused beams, highlighting detail in the water column and in the bottom structure. (Very Good)
  
• Airmar TM258 - 1KW 50/200KHz includes water temperature 25 times more sensitive than a standard transducer. (Excellent)
  
• Airmar TM260 - 1KW 50/200KHz includes water temperature 50 times more sensitive than a standard transducer. (Ultimate)

Through Hull Mounted Transducers for Furuno 10 Pin Plug (for launches or yachts)

• Airmar P319 - Plastic 50/200KHz includes water temperature. (Good)
  
• Airmar B45T - Bronze 50/200KHz includes water temperature and fairing block. (Very Good)
  
• Airmar B744 - Bronze 50/200KHz includes water temperature, speed and fairing block. (Very Good)
  
• Airmar B258 - 1KW Bronze 50/200KHz includes water temperature and fairing. 25 times more sensitive than a standard transducer. (Excellent)
  
• Airmar B260 - 1KW Bronze 50/200KHz includes water temperature and fairing block. 50 times more sensitive than a standard transducer. (Ultimate)