VETUS Ignition Protected Bow Thruster 25kgf 12V

Installing an electric bow or stern thruster in a petrol (gasoline) engined boat can be very dangerous, due to the possibility of the electric motor igniting fuel vapour. In order to eliminate the risk, this special housing will shield the bow or stern thruster from potentially explosive vapour.

The housing enables the thruster to comply with the ISO 8846 Marine ignition protection standard. In addition to the standard thruster, the set consists of a watertight (IP65) housing for the electric motor and relays, together with all required seals, electrical connectors and fastening components.

An automatic fuse for the control loom is also supplied. This can be reset externally without opening the housing. For both 12 and 24 volt supply. They can also be used as stern thrusters, in combination with the appropriate kit.

Because the motor housing is watertight, these sets are also ideal for use where the bow or stern thruster is installed in a wet or humid space.

Specifications:

Voltage (V)	12 V DC
Ignition protection	Yes
Thrust (N / kgf)	250/25
Power (kW)	1,5
Motor, reversible D.C.	Yes
Internal tunnel diameter (mm)	110
Weight (kg)	10
Current consumption (A)	200
Continuous operating time (min)	4
Max. operating time (minutes)	4
Main fuse 'slow blow' (A)	125
Batteries 12 V, min./max. Ah	1x55 / 1x70
Battery cables, length pos./neg. cables (m/mm)	0-8/25 8-12/35
Battery main switch: model BATSW / type BPMAIN	250/12
Size A in mm, see drawing	138
Size B in mm, see drawing	297
Size C in mm, see drawing	73
Size D min./max. in mm, see drawing	220/440
Size E in mm, see drawing	149
Size F, diameter in mm, see drawing	112
Size G min. in mm, see drawing	110
Size H, diameter in mm, see drawing	110

Product Data Sheet