Moeller Tank Level Reed Type Sender Unit and Gauge for Fuel Tanks

For precise and quick measurements of fuel tank levels

The Moeller Tank Level Sender Unit Reed Type features stainless steel internal components, providing you with precise and quick measurements of fuel tank levels. Each unit is individually tested for accurate calibrated readings. And what's more, you'll collect more consistent fuel level information since it takes measurements from the float switch - which is still a moving part. However, the fluctuation is much less due to the range of motion.

What's Included:

• Part number: IN1791 Tank sender (Reed type. 152~610mm. USA. 035791-10)
• Part number: 12801 Gauge (EURO - FUEL LEVEL 240-33 OHM)

Moeller Tank Level Sender Unit Reed Type Features:

• Individually tested for accurate calibrated readings
• Reliable reed switch array sending unit
• Will not rust or corrode (internal or external to the tank)
• Stainless steel and plastic construction
• Industry standard - calibrated to 33 ~ 240 ohms
• Adjusts easily to fit a range of tank depths
• Suitable for petrol, ethanol and grey water (also diesel and bio diesel if separate return line is available) Do not use for potable water

Moeller Tank Level Sender Unit Reed Type Specifications.

• For tank depths 152mm (6") to 610mm (24")
• Comes complete with 5 hole gasket and mounting screws
• 5 screw fixing on 2.1/8" (54mm) centres
• For installation the following tools are required: tape measure, bladed (or 5/16" hex head socket) screwdriver, Philips screwdriver, small hacksaw and electrical wire connecting tools
• SAE 5 bolt pattern
• Tank requires a 1.3/8" diameter hole
• 5 screw fixing on 2.1/8" (54mm) centres

Faria 12801 Fuel Gauge Features:

• Bright white numerals and pointers
• Non-glare black background
• Low profile European style black bezels
• Reads E-1/2-F
• High grade materials
• Impact resistant construction