Powertech Pure Sine Wave Inverter 400W 12VDC to 230VAC

Power on the go!

The new Powertech Pure Sine Wave Inverter features advanced control logic which provides standard protection against overload, high temperature, over/under input voltage and output short circuit. It also comes with new features to provide improved performance and reliability under adverse conditions.

Control Logic
The control logic checks inverter and load conditions at start-up before applying power. It also applies a soft start feature which near eliminates the risk of inverter overload when large appliances with high in-rush currents are used. Overload detection and prevention uses a three stage alarm which acts as a timed warning so you can decrease the load before the inverter completely shuts down. High temperature protection automatically shuts the inverter down when it reaches a predetermined temperature, then restarts once the temperature has dropped to a lower level. A power saving mode can also be activated to minimise battery drain when the AC output falls below a set power threshold; ideal for use on small appliances such as entertainment equipment. When the threshold is reached the inverter is switched to standby substantially decreasing the standby current draw.

Powertech Pure Sine Wave Inverter Features:

• 12VDC to 230VAC inverter
  
• 400W
  
• Pure sine wave
  
• Electrically isolated
  
• Fast charge USB port (5VDC 2.1A)
  
• Advanced control logic - standard protection against overload, high temperature, over/under input voltage and output short circuit
  
• Soft start - eliminates the risk of inverter overload
  
• Overload detection and prevention
  
• High temperature protection automatically shuts the inverter down when it reaches a predetermined temperature
  
• Power saving mode can also be activated to minimise battery drain
  

Powertech Pure Sine Wave Inverter Specifications:

• Output power continuous: 400W
  
• Output power surge: 800W (1sec)
  
• Current at no load: <1000mA
  
• Power Saving Modes: None
  
• Input voltage: 10.5-15.3VDC
  
• Output wave form: Pure sine wave
  
• Efficiency: >86%
  
• Output regulation: ±5%
  
• Output frequency: 50Hz
  
• USB output: 5VDC @ 2.1A
  
• Size: 213(L) x 100(W) x 60(H)mm
  
• Weight: 870g
  
• Input connection: Heavy duty screw terminals
  
• Remote control: None