Jabsco PAR-Max Plus 2.9 Water System Pump 12V 15L 40PSI

#9105285
Warranty Badge - 3-Years
Why pay $377.02
ONLY $349.00
SAVE $28.02!

Seen a lower price? Ask us to beat it

No payments or interest for 12 months*

Click on the image above to view full picture

More Views

The item you're looking at is currently unavailable or has limited stock, how about this one instead?
Details

Details

Efficient, high-flow, self-priming pump

The high-pressure capability of the new Jabsco PAR-Max Plus 2.9 Water System Pump provides exceptional flow and consistent water pressure to easily handle the demand of multiple outlets at one time. This efficient, high-flow, self-priming pump capable of serving multiple outlets is great for boat owners. It includes soft rubber mounts and quick-connect fittings for ease of installation. The sealed switch and co-moulded diaphragm eliminates leak paths, extending the life of the pumps by up to 50%. The automatic pressure switch has been tested over 4 million cycles without failure, ensuring it will stand up to heavy-duty use. Plus it has improved noise-dampening rubber feet to significantly minimise vibration when mounted against hard surfaces.

Jabsco PAR-Max Plus 2.9 Water System Pump Features:
  • Sealed switch and co-moulded diaphragm eliminates leak paths, extending the life of the pumps by up to 50%
  • Automatic pressure switch tested over 4 million cycles without failure
  • Quick-disconnect ports allow for adjustability and ease of installation
  • Improved noise dampening rubber feet significantly minimise vibration when mounted against hard surface
  • Efficient, high-flow, self-priming pump serving multiple outlet
  • Multi-diaphragm design self primes to 3m vertical lift, can run dry without damage
  • Supplied with snap-in ports for hose or Hep20 connectors
  • Quiet running, smooth flow
  • Certified to EN ISO 8846 Marine (Ignition Protection)

Jabsco PAR-Max Plus 2.9 Water System Pump Specifications:
  • Body Materials: Glass Filled Polypropylene
  • Diaphragm: Santoprene
  • Valves: EPDM
  • Port Type: 1/2'' (13mm) Hose barb or Thread on 4gpm
  • 3/4in (19mm) Hose barb or Thread on 5 and 6gpm
  • Voltage: 12 VDC
  • Motor Type: Thermal overload protection
  • Output: 15 litres/minute (3.3 gallons/minute) open flow
  • Connections: for 15mm (1/2”) bore hose or Hep20 push-fit connectors CW193
  • Dimensions: 252mm long, 129mm wide, 111mm high
  • Weight: 3.6kg
  • Fuse Size: 20(amp)
  • Protection Class (IP Rating): IPX6
  • Pressure switch: cuts in at 1.7bar (25psi) - cuts out at 2.8bar (40psi)
  • Packaged Dimensions: L:17.00 x H:11.00 x W:34.00cm

Products You Recently Viewed

Recently Viewed