CruzPro RH-60 Engine Management Instrument
Buy Now, Pay Later with
Find Local Store
Minimum spend $200. Lending criteria, $50 annual Account Fee, fees, Ts&Cs apply. At end of interest free period, Q Mastercard Expired Promotional Rate or Q Card Standard Interest Rate of 28.95% p.a. applies (see Ts&Cs for Q Mastercard Standard Interest Rate). $55 Establishment Fee or $35 Advance Fee applies.
*See here for full T&CThe RH60 displays RPM, maximum RPM, Engine Hours and Elapsed trip time in a digital format.
The RH60 works with any engine and can be driven from a wide range of signal frequencies and amplitudes. Front panel calibration is provided for accuracy to within 1 RPM.
A separate engine hours countdown alarm can be set to warn you to perform needed maintenance every set number of hours of engine running time. When activated, the RH60 built-in 85 dB alarm will sound and the display will flash.
Five levels of backlighting can be selected
Data is output on an NMEA 0183 compatible serial data line or that screw terminal can be programmed as an external alarm output.
The RH60 draws only 0.017 amps 12 or 24 volt
Specifications:- Operating Voltage: 9.5 - 33.0 VDC
- Current Drain: 0.018 amps nominal
- Display: 4 digit LCD, 5 levels of backlighting 13 levels of display damping
- Data: RPM (0-9999), Engine Hours (0.0-9999), Elapsed Time (00:00 mins/sec to 99:59 hrs/mins)Max. RPM Alarm, Max RPM seen storage (reset-able).
- Inputs: Low, Medium and High sensitivity inputs works from any RPM sender signal
- Data Ouput: NMEA 0183 serial 4800 BAUD or use as external alarm output
- Alarms: Built-in 85 dB audible Max RPM alarm and settable maintenance hours alarm
- Size: 2.5'' dia X 4.1'' deep (61mm x 104mm)
- Mounting: 2-1/8'' (55mm) round hole