CRC Grey RTV Gasket Sensor Safe
Buy Now, Pay Later with
Find Local Store
Minimum spend $200. Lending criteria, $50 annual Account Fee, fees, Ts&Cs apply. At end of interest free period, Q Mastercard Expired Promotional Rate or Q Card Standard Interest Rate of 28.95% p.a. applies (see Ts&Cs for Q Mastercard Standard Interest Rate). $55 Establishment Fee or $35 Advance Fee applies.
*See here for full T&CSelf-Forming Non-Acidic RTV Silicone Gasket
CRC Grey RTV Gasket Sensor Safe is formulated for high torque applications (predominantly Japanese designs) and has an intermittent service temperature of up to 330 degreesC.
CRC Grey RTV Gasket Sensor Safe is a self-forming room temperature vulcanising Silicone that replaces almost any cut gasket, felt, cork, paper, asbestos and rubber gaskets. No gasket sealers are required - the pure silicone rubber forms to any size and shape quickly.
CRC Grey RTV Gasket Sensor Safe features low odour and is non-corrosive with excellent oil resistance. It resists migrating caused by thermal cycles, cracking, shrinking and vibration and is highly resistant to auto and shop fluids.
Do not use as a head gasket, not suitable for stove pipes or in fireplaces.
Features and Benefits
- Sensor safe
- Intermittent service temperature of up to 330 degreesC
- Makes any size or shape of gasket in minutes
- Replaces most automotive gaskets
- Odourless, non-corrosive, safe for all models, excellent oil resistance
- Easy to apply
- Excellent adhesion
Uses
- Rear main bearing cap split line
- Damper keyway sealing
- Differential cover, intake and seals
- OHC cap
- Oil pan corner seals
- Oil pan gasket
- Side cover plate
- Thermostat housing
- Timing cover
- Transmission pan
- Valve cover gasket
- Vibration damper
- Water pump cover gasket
- Intake manifolds
Specifications:
Physical Properties and Performance Characteristics
| Composition | Silicone Polymer |
|---|---|
| Curing Method | Neutral (Oxime) |
| Colour | Grey |
| Continuous Service Temperature | 260 degreesC |
| Intermittent Temperature | 330 degreesC |
| Hardness (Shore A) | = 18 |
| Tensile Strength | = 0.8 N/mm2 |
| Elongation at Break | = 250% |
| Elastic Recovery | 100% |
| Shrinkage | 1% |
| Tack Free Time | = 30 minutes |