Special Order
Sikaflex AT Facade Joint Sealant
Find it in store:
Deliver to:
Auckland 1026,
NZ
Estimated:
$5.99
2-hour Click & Collect:
(order before 3pm, in-stock products only)
Our Auckland Shop
Free
Buy Now, Pay Later with
Find Local Store
Buy Now Pay Later with Afterpay. Available for purchases between $99 and $2000.
QCard No payments or interest for 12 months*
Minimum spend $200. Lending criteria, $50 annual Account Fee, fees, Ts&Cs apply. At end of interest free period, Q Mastercard Expired Promotional Rate or Q Card Standard Interest Rate of 28.95% p.a. applies (see Ts&Cs for Q Mastercard Standard Interest Rate). $55 Establishment Fee or $35 Advance Fee applies.
*See here for full T&C
Report incorrect product information
1-component, moisture-curing, low-modulus elastic sealant
The Sikaflex AT Facade Joint Sealant is a 1‐part, moisture curing elastic sealant based on Silane Terminated Polymers. It's especially formulated for movement and connection joints on porous and non‐porous substrates, where excellent weatherability and highest UV resistance are required. AT Facade is designed for joint sealing of movement and connection joints, porous and non-porous substrates such as concrete, brick, steel metals.
Uses
Sikaflex AT‐Facade is suitable for joint sealing of movement and connection joints between the same or different substrates i.e. for concrete, steel and other metals, brick etc.
Sikaflex AT Facade Joint Sealant Features:
- Fulfils ISO 11600 F, Class 25 LM
- Movement capability +/‐25%
- Low stress to the substrate
- Highest UV resistance, colour stability and ageing
resistance
- Excellent workability (low extrusion force, perfect
smoothability)
- Very easy to tool and finish
- Excellent adhesion on porous and non porous substrates
- Primerless adhesion on many substrates
- Over paintable
- Solvent free
- Silicone free
- Matt finish
- Colour: Grey, White, Black
Sikaflex AT Facade Joint Sealant Specifications:
- Chemical Base: 1‐part Silane Terminated Polymers (PU‐Hybrid
technology, moisture curing)
- Density: ~ 1.3kg/l depending on colour (DIN 53 479)
- Skin Time: ~ 80 minutes (+23°C / 50% r.h.)
- Curing Rate: ~ 3mm/24 h (+23°C / 50% r.h.)
- Movement Capability: 25% LM
- Joint Dimensions: Min. width = 10mm / max. width =
40mm
- Sag Flow: 0mm, very good (DIN EN ISO 7390)
- Service Temperature: ‐40°C to +70°C
- Tear Strength: ~ 5.5 N/mm2 (+23°C / 50% r.h.) (DIN 53
515)
- Shore A Hardness: ~ 25 after 28 days (+23°C / 50% r.h.) (DIN 53
505)
- E-Modulus:
0.3 N/mm2 at 100% elongation (+23°C)
0.5 N/mm2 at 100% elongation (‐20°C) (DIN EN ISO 8340) - Elongation at Break: ~ 550% (+23°C / 50% r.h.) (DIN 53
504)
- Elastic Recovery: > 80% (+23°C / 50% r.h.) (DIN EN ISO 7389
B
Product Data Sheet
Safety Data Sheet
Some of our product deals are strictly limited - once they're gone, they're gone! Secure yourself this amazing deal while stocks last...by clicking the Add to Order button above.