CruzPro NC-20/8 NMEA to RS232 Data Converter
Buy Now, Pay Later with
Find Local Store
Minimum spend $200. Lending criteria, $50 annual Account Fee, fees, Ts&Cs apply. At end of interest free period, Q Mastercard Expired Promotional Rate or Q Card Standard Interest Rate of 28.95% p.a. applies (see Ts&Cs for Q Mastercard Standard Interest Rate). $55 Establishment Fee or $35 Advance Fee applies.
*See here for full T&CThe CruzPro NC20 NMEA combiner accepts up to 4 or 8 channels of NMEA (and/or RS232) serial data at 4800 BAUD and combines these signals onto one RS232 compatible output line at either 4800 or 9600 BAUD.
The NC20 can handle any mix of NMEA and RS232 input signals at 4800 BAUD and multiple units can be daisy-chained for more inputs than 4 or 8 channels.
The input signal level can be as low 1.6 Vp-p and as high as -20 to +22 VDC without damaging the instrument. The output level is RS-232 compatible -10 to +12 VDC.
The 4 channel version of the NC20 draws less than 0.05 amps and the 8 channel version draws less than 0.08 amps.
The NC20 output can be fed to a variety of different NMEA enabled instruments such as chart plotters, computers, radar screens or remote data repeaters such as the CruzPro RP30 and/or RP110
Specifications:- Operating Voltage: 9.5 to 33.0 VDC, 0.05 amps nominal.
- Operating temperature: 0 to 50 deg Celsius ( 32 to 122 deg Fahrenheit).
- Size: 100 x 60 x 30 mm (4 x 2.4 x 1.2 inch).
- Input Channels: NC20/4 4 channels NC20/8 4 channels.
- Input Level:0 to 1.6 Vp-p minimum, -20 to +22 VDC maximum.
- INPUT Data Rate:4800 BAUD.
- OUTPUT Data Rate:4800 BAUD or 9600 BAUD (Selectable).
- Drive Capability:RS232 output -10VDC to +12VDC.