Special Order
Powertrain 7-Stage LiFePO4 Battery Charger
Available Now
Find In Store
Deliver to:
Auckland 1026,
NZ
Estimated:
$5.99
2-hour Click & Collect:
(order before 3pm, in-stock products only)
Our Auckland Shop
Free
Buy Now, Pay Later with
Find Local Store
Buy Now Pay Later with Afterpay. Available for purchases between $99 and $2000.
QCard No payments or interest for 12 months*
Minimum spend $200. Lending criteria, $50 annual Account Fee, fees, Ts&Cs apply. At end of interest free period, Q Mastercard Expired Promotional Rate or Q Card Standard Interest Rate of 28.95% p.a. applies (see Ts&Cs for Q Mastercard Standard Interest Rate). $55 Establishment Fee or $35 Advance Fee applies.
*See here for full T&C
Report incorrect product information
Keep your batteries topped up and ready for adventure
Don't let a flat battery cut short your adventure on the water or the road. The Powertrain 7-Stage LiFePO4 Battery Charger is your essential smart charging solution, designed to keep all your marine and RV batteries in peak condition. This intelligent charger automatically detects 6V, 12V or 24V batteries and optimises charging for Gel, Lead Acid, AGM and Maintenance Free types – no complicated button pressing needed! Plus, with a dedicated 12V Lithium mode, you’re sorted for modern LiFePO4 batteries too, ensuring they get the precise care they need for maximum lifespan.
Sporting an advanced 7-stage charging process, this unit goes beyond basic charging, actively maintaining your battery's health and extending its life, so it's always ready when you are. The large, easy-to-read LED display gives you real-time updates on charging stage, volts, amps and battery capacity at a glance – no guesswork involved. Had a completely flat battery? The Powertrain 7-Stage LiFePO4 Battery Charger can even revive deeply discharged zero-volt batteries (just remember to remove any load!) saving you from costly replacements.
Safety is paramount, which is why it comes loaded with comprehensive protection against short circuits, reverse connections, over-temperature, overload and over-voltage. And for added versatility, it features a 13.5V DC power supply mode (8A, 12A or 16A options) for auxiliary power. With its integrated hanging hook and clever cable management, this charger is designed for practical, tidy storage and secure mounting wherever your adventures take you.
Powertrain 7-Stage LiFePO4 Battery Charger Features:
- Button-less automatic battery voltage selection
- Suitable for 6 Volt, 12 Volt and 24 Volt DC automotive batteries
- Button-less automatic battery chemistry selection
- Suitable for Gel, Lead Acid, AGM and Maintenance Free Calcium types of automotive batteries
- Dedicated 12V Lithium mode for modern LiFePO4 batteries
- Large easy to read LED display shows the charging stage status, volts and amps output and battery capacity
- Built-in protection systems for safe operation
- Zero volt start up, enabling recovery and charging of a completely deep discharged battery
- 13.5V DC power supply for 8A, 12A and 16A output currents with overload and short circuit protection
- Internal or external short circuit, reverse connection, over temperature, overload and over voltage protection
- Charger can be hung with a hook and the power cable can be wound on the back
Powertrain 7-Stage LiFePO4 Battery Charger Specifications:
| Part Number | PBC8A | PBC12A | PBC16A |
|---|---|---|---|
| Charger Type | Automatic 7 Stage switch mode Trickle charging | Automatic 7 Stage switch mode Trickle charging | Automatic 7 Stage switch mode Trickle charging |
| Input Voltage | AC(230V-240V) / 50Hz | AC(230V-240V) / 50Hz | AC(230V-240V) / 50Hz |
| Lithium Compatible | Yes | Yes | Yes |
| Output Voltage | 6V / 12V / 24V DC (Charger will auto select) | 6V / 12V / 24V DC (Charger will auto select) | 6V / 12V / 24V DC (Charger will auto select) |
| Output Current | 8A @6V/12V, 4A@24V | 12A @6V/12V,6A@24V | 16A @6V/12V, 8A@24V |
| Zero Volt Start | Yes | Yes | Yes |
| DC Power Supply | 13.5V 8A with overload and short circuit protection | 13.5V 12A with overload and short circuit protection | 13.5V 16A with overload and short circuit protection |
| Warranty | 5 Years | 5 Years | 5 Years |
| Short circuit, Reverse connection, overload, over-voltage, over-charging, over-temperature protection | Yes | Yes | Yes |
| Battery Charging Capacity | 40Ah to 100Ah | 40Ah to 160Ah | 40Ah to 200Ah |
| Operating Temperature | -15°C - +50°C | -15°C - +50°C | -15°C - +50°C |
| Product Casing | Plastic | Plastic | Plastic |
Note: When the charger is connected to a battery and switched on, the unit will take approximately 1 minute to test and initialise the correct voltage program. This occurs automatically with no user input required. To charge 12V lithium batteries, please press the button on the front of the unit to switch to 12V Lithium charging. This will display on the LED screen.
Note: Do not attempt to recharge dry cell batteries.
Advisory on the images used for this listing: The images used in this product listing are based on information provided to us by our suppliers and may represent a product range, or be for illustration purposes only, and may not be an exact representation of the product, and therefore should be used as a general guide only.
Some of our product deals are strictly limited - once they're gone, they're gone! Secure yourself this amazing deal while stocks last...by clicking the Add to Order button above.