interVOLT Non-isolated Switchmode Voltage Stabiliser 24-24 VDC 2.5A

Not your ordinary voltage regulator

If you're looking for a cost-effective solution to your voltage problems and you don't require DC-DC isolation, then the SVS (Switchmode Voltage Stabiliser) is perfect for you. The interVOLT Non-isolated Switchmode Voltage Stabiliser is a power conditioning device without the galvanic isolation. It will protect your in-vehicle/vessel electronic equipment from a range of voltage issues including dips, spikes, and sustained low and high voltage transients. Its digital over analogue control makes this stabiliser second-to-none in terms of performance. It pairs diagnostics with LED status indication so you can easily identify and troubleshoot issues should they arise.

The interVOLT Non-isolated Switchmode Voltage Stabiliser also boasts automatic features that protect both the device and the equipment connected. Its new mounting plate design doesn't increase the footprint. This means that you can install it in areas such as under dash, under seat, in electrical enclosures or anywhere space is limited. Get this value-for-money compact device so you can wave goodbye to your voltage problems.

interVOLT Non-isolated Switchmode Voltage Stabiliser Features:

• High visibility LED status display indicators
• Excellent line and load regulation characteristics
• Highly stable under a range of input conditions
• Suitable for high temperature environments
• Compact in size with unique mounting facility
• Corrosion resistant construction and hardware
• Conformally coated printed circuit board

interVOLT Non-isolated Switchmode Voltage Stabiliser Specifications:

• Model: 24VDC Version: SVS2424025
• Input Voltage: 22V to 33V (will dip to 16V)
• Output Voltage: 25.0VDC plus or minus 1%
• Current rating: 2.5 Amps maximum
• Standby Current: Idle current 70mA @ 26.0V input
• Conversion Efficiency @ 25°C: Up to 95% (26.0Vin @ 2.5A load)
• Load Regulation: 0.1% up to full load @ 26.0V input
• Line Regulation: 1.5% of rated output @ 22V – 33V input
• Output Ripple: 10mV rms (nominal) @ 26.0V input, 2.5A load
• Diagnostics: Supervisory LED indication including
  - Output status LED
  - Low voltage input LED
  - High temperature LED
  - Output overload/short circuit LED
• Protection
  - Input under voltage: Shutdown with auto reset and fault indication
  - High temperature: Shutdown with auto reset and fault indication
  - Overload/Short Circuit: Shutdown with auto reset and fault indication
  - Transient voltage: Filtering via purpose designed circuitry
• Environmental Consideration
  - Operating temperature is -20°C to +50°C
  - Operating humidity ideally < 95% (non condensing)
• Environmental Protection: Conformally coated PCBA (tropicalisation)
• Termination: Purpose M3 Screw terminal with combination head
• Construction: ABS/PC alloy and 6063-T5 anodised aluminium
• Length: 101mm overall
• Width: 62mm overall
• Height: 34mm including mounting plate
• Weight: 160 grams
• Conformity: EMC – AS/NZS CISP 11 and EN55011. Australian C Tick and European CE mark

interVOLT Non-isolated Switchmode Voltage Stabiliser Manual