Magnum Energy Battery Monitor Kit

#9016668
Warranty Badge - 12-Months
ONLY $269.00

Seen a lower price? Ask us to beat it

No payments or interest for 12 months*

Click on the image above to view full picture

More Views

The item you're looking at is currently unavailable or has limited stock, how about this one instead?
Details

Details

Monitor your battery status at a glance

The Magnum Energy Battery Monitor Kit makes the complex task of monitoring battery levels easier! Acting as a “fuel gauge” for your batteries, it monitors their state of charge (SOC) and then provides this information in an easy-to-understand display via the ME-ARC or ME-RC remotes. With accurate SOC readings, you can avoid unnecessary battery recharging, saving on fuel and long-term maintenance costs.

If you already have a Magnum Inverter/Charger and Remote (ME-ARC or ME-RC) (requires remote rev 2.0 or higher), this battery monitor kit is an easy retrofit. Simply install according to the installation manual and begin monitoring your battery bank via the “Meter” button.

Magnum Energy Battery Monitor Kit Specifications:
  • DC volts: 7 to 70 (±0.5%) auto voltage detection
  • DC amps: ±0.1 to 999 (±1.0%)
  • Battery SOC %: 0 to 100% (1% increments)
  • Power draw: < .6 watts
  • Amp hours in/out: ±32,768 amp hours (1 AH increments)
  • rAH out (resettable amp hours removed): 0 to 65,535 amp hours, resettable (0.1 AH increments)
  • tAH out (total amp hours removed): 0 to 65,535,000 amp hours (0.1 k or 100 AH increments)
  • Minimum/maximum DC: 7 to 70 VDC, resettable
  • Shipping weight: 2lb (.9 kg)
  • Sense wire: Twisted pair –blue & orange, 5’ length, 18 AWG wire
  • Communication cable: 4-conductor, 10’ twisted pair, telephone standard
  • Remote requirements: Use with an ME-RC with firmware revision of 2.0 or higher or an ME-ARC (all revisions)

Available readings:
  • State of Charge (SOC) 0 – 100%
  • DC volts
  • DC amps
  • Amp hours in/out
  • Resettable amp hours out
  • Total amp hours out
  • Minimum volts DC
  • Maximum volts DC
  • Temperature compensated
  • Auto detects input voltage

What's in the Kit:
  • Sense module
  • DC shunt
  • 50mv/500 amp shunt (not included in the ME-BNK-NS kit)
  • Twisted pair wire 5’ length, 18 AWG wire
  • Communication cable
  • 10’ length, 4-conductor, telephone standard

Magnum ME-BMK Battery Monitor Kit Owner's Manual

Products You Recently Viewed

Recently Viewed