Sikaflex-123 MS Bond Adhesive and Sealant 300ml Black - Past best before.

Adhesive and sealant in one

Note on condition: These tubes are 'past their best before date' - which is September.

The new Sikaflex-123 MS Bond Adhesive and Sealant is a 1-part, multipurpose adhesive and sealant with a very broad adhesion and sealing profile which bonds and seals most construction material substrates. It sticks and seals in one.

Uses:

• Concrete
• Masonry
• Most stones
• Ceramic
• Wood
• Metal
• Glass
• Plastics such as PVC, PA, PET, EPS/SPS

Sikaflex-123 MS Bond Adhesive and Sealant Features:

• Bonds well to a variety of substrates without surface pre-treatment
• Bonds to damp concrete
• Compatible with most substrates, EPS/XPS, building wraps and bitumen
• Good mechanical resistance and weathering resistance
• Adhesive-sealant with CE marking
• A sealant to seal vertical and horizontal joints

Sikaflex-123 MS Bond Adhesive and Sealant Specifications:

General

• Chemical Base: Silane terminated polymer
• Packaging: 300ml cartridge
• Colour: Black
• Shelf Life: Twelve (12) months from the date of production when stored as stated
• Storage Conditions: The product must be stored in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +5 °C and +25 °C. Always refer to packaging
• Density: ~1.50 kg/l

Technical Information

• Shore A Hardness ~36 (after 28 d) (ISO 868)
• Tensile Strength ~1.5 N/mm² (ISO 37)
• Secant Tensile Modulus ~0.65 N/mm² at 60 % elongation (23°C) (ISO 8339)
• Elongation at Break ~250 % (ISO 37)
• Elastic Recovery ~75 % (ISO 7389)
• Tear Propagation Resistance ~4.5 N/mm (ISO 34)
• Service Temperature −50 °C min. / +80 °C max
• Joint Design The joint width must be designed to suit the movement capability of the sealant. The joint width shall be ≥ 6 mm and ≤ 20 mm. A width to depth ratio of 2:1 must be maintained. Joints ≤ 10 mm in width are for crack control and therefore non-movement joints