Trojan Non Brake Hub and Stub Kit 2000kg
Buy Now, Pay Later with
Find Local Store
Minimum spend $200. Lending criteria, $50 annual Account Fee, fees, Ts&Cs apply. At end of interest free period, Q Mastercard Expired Promotional Rate or Q Card Standard Interest Rate of 28.95% p.a. applies (see Ts&Cs for Q Mastercard Standard Interest Rate). $55 Establishment Fee or $35 Advance Fee applies.
*See here for full T&CThese non braked hub kits are designed to fit Trojan's Duratorque and beam axles but should also fit most NZ manufactured trailer axles. The Hubs have a 2000KG GVM (Gross Vehicle Mass) load rating which is based on a single axle and a pair of hubs. Trojan's range of hubs come in a wide variety of wheel stud patterns to suit the most common wheel sizes. The most common stud pattern 5 Stud with a PCD measurement 4 1/2 inch and fits Trojan's most commonly stocked rims and tyres. The hub kits in this range are able to fit a bolt on disc, but are supplied without disc. The 38mm stub round axle supplied has a caliper mount
Specifications:| Part No. | Studs | PCD diameter | Stud width | Flange diameter | 'x' in mm |
|---|---|---|---|---|---|
| T124105 | Blank | 190mm | |||
| T124135 | 5 | 4 1/2 inch | 1/2 inch | 190mm | 67.183mm |
| T124140 | 5 | 120mm | 7/16 inch | 190mm | 70.535mm |
| T124155 | 6 | 5 1/2 inch | 1/2 | 190mm | 82.118mm |