J-B Weld ExtremeHeat Metallic Repair Paste 85.2g

#9093756
Warranty Badge - 12-Months
In Stock - Ready to Ship
ONLY $25.99

Seen a lower price? Ask us to beat it

Add Items to Cart
No payments or interest for 12 months*

Click on the image above to view full picture

Details

Details

Temperature-resistant metallic paste

The J-B Weld ExtremeHeat Metallic Repair Paste is formulated to allow for repairs to iron, steel and metal in high temperature environments (1000°F / 538°C). When fully cured, this metallic compound can be drilled, machined or sanded. It is great for repairing cracks, small gaps, seam connections or holes in exhaust manifolds, pipe connections, mufflers, catalytic converters, outdoor grills, fire boxes, gas and commercial furnaces and water heaters. This product is water based, non-flammable and contains no solvents or Volatile Organic Compounds (VOCs).

J-B Weld ExtremeHeat Metallic Repair Paste Features:
  • Set Time: 1 Hour
  • Cure Time: 24 Hours
  • Able to withstand continuous heat (1000°F / 538°C)
  • Cure Colour: Machine Grey

Applications:
  • Exhaust Manifolds
  • Tail Pipes
  • Mufflers
  • Engine Blocks
  • Duct Work
  • Heat Exchange Units
  • Fire Box / Fire Place
  • Outdoor Grills

Instructions:
  1. Prepare: Remove dirt, debris or loose contaminants from surface. Use sand paper to roughen. For some repairs, open small cracks further with a drill or screwdriver to create a 1/8in gap.
  2. Open J-B Weld Extreme Heat. Thoroughly mix product.
  3. Apply: Use product generously, working onto surface or into hole, crack, pit or seam. Repeat as needed. Allow 2-4 hours set up, depending on temperature and current environment.
  4. Dry: Test cure by pressing fingernail or thumbnail into repair material. If unable to penetrate, then repair is complete. If area appears slightly soft, use a non-flame heat source, such as a hair dryer, to speed cure time, or allow 24 hours before allowing high heat exposure. Repeat test until fully cured.

Products You Recently Viewed

Recently Viewed