ADOS Resamax Epoxy Mortar Hardener 10L
Buy Now, Pay Later with
Find Local Store
Minimum spend $200. Lending criteria, $50 annual Account Fee, fees, Ts&Cs apply. At end of interest free period, Q Mastercard Expired Promotional Rate or Q Card Standard Interest Rate of 28.95% p.a. applies (see Ts&Cs for Q Mastercard Standard Interest Rate). $55 Establishment Fee or $35 Advance Fee applies.
*See here for full T&CConcrete Repair
ADOS Epoxy Mortar is a two part silica based epoxy. Once mixed, the putty can be easily moulded to form permanent watertight repairs with a smooth finish to concrete, brick, mortar and plaster. It adheres well to wet surfaces and is suitable for most underwater repairs. In cured form ADOS Epoxy Mortar is many times harder and more impact resistant than concrete, has a similar consistency and colour to new concrete, and has excellent chemical and UV resistance.
Features and Benefits
- Permanent and super strong - Cures harder than concrete
- Cures watertight - Suitable for repairs to submerged substrates
- Adheres to wet surfaces - Can be applied underwater
- Excellent cohesive properties in uncured state - Easy to work and mould, ideal when a smooth even finish is required
- Appearance - Similar consistency and colour to new concrete
- Non-slump - Suitable for overhead and vertical applications
- 100% solids - No shrinkage when cured
- Resilient - Excellent resistance to chemicals and UV rays
- Convenient to use - 1:1 formulation, ensures correct mixing each time
Specifications:
Typical Properties and Characteristics
| Type | Epoxy |
|---|---|
| Composition | Silica based epoxy system |
| Colour | Similar to new concrete |
| Minimum Temperature for Curing | -10 degreesC |
| Service Temperature | Continuous 80 degreesC, Intermittent 150 degrees C |
| Reactivation | N/A |
| Viscosity | Paste-like |
| Solids | 100% |
| Hold Up | In thick film, excellent. Has an inherent thixotropic aspect, and exhibits no slump during the cure process. |
| Working Time | Up to 20 minutes at 20 degreesC |
| Thinning | Not required |
| Clean Up | Use ADOS Epoxy Solvent Clean Up for cleaning uncured material off utensils. Wash off skin with soap and water only. |
| Compressive Strength | 97.6 MPa |
| Tensile Strength | 26.8 MPa |