J-B Weld ClearWeld Quick Setting Epoxy Syringe

Sets to a hard, permanent bond

The J-B Weld ClearWeld Quick Setting Epoxy Syringe is a quick setting, multipurpose two part epoxy that provides a strong and lasting bond on most surfaces including tile, most plastics, ceramic, glass, wood and metal. ClearWeld is designed to cure with a clear, transparent bond when used at thicknesses of less than 15mm. It has a 1:1 mixing ratio, sets in 5 minutes and cures in 1 hour with a tensile strength of 4400 PSI. Plus it comes with a syringe for a more convenient application. Simply remove the cap, press down the plunger to squeeze equal amounts and mix thoroughly. Order yours now and get the job done in no time.

J-B Weld ClearWeld Quick Setting Epoxy Syringe Features:

• Multi-purpose
  
• No waste
  
• No mess cap
  
• Strength: 4400 PSI
  
• Set Time: 5 Minutes
  
• Cure Time: 1 Hour
  
• Dries Clear
  
• Great For: Tile, most plastics, ceramic, glass, wood and metal
  

Instructions:

• Prepare: Clean surface area of dirt, grease, oil, paint or loose debris. For best results use a detergent or degreaser to first clean the surface, then roughen surface with file or coarse sandpaper to provide the best repair.
  
• Mix: After removing the replaceable cap, press down on plunger and squeeze equal amounts onto a disposable surface and mix thoroughly.
  
• Apply: Apply with appropriate tool in an even coat, weld bead or extruded shape as needed.
  
• Dry: Sets in 5 minutes. Cures in 1 hour. If temperature is below 40ºF, then set time is longer.
  

Material Safety Data Sheet