Special Order
West System Mixed 105 Epoxy Resin and 206 Slow Hardener 4.8L
Deliver to:
DG Class: 9
Auckland 1026,
NZ
Estimated:
$19.04
2-hour Click & Collect:
(order before 3pm, in-stock products only)
Our Auckland Shop
Free
Buy now, pay later & Finance Options
Find Local Store
Report incorrect product information
Rigid, high-strength, moisture-resistant solid with excellent bonding and coating properties
The West System Mixed 105 Epoxy Resin and 206 Slow Hardener is a mix of five parts 105 Epoxy Resin to one-part 206 Slow Hardener that cures into a rigid, high-strength, moisture-resistant solid with excellent bonding and coating properties.
West System 105 Epoxy Resin
The West System 105 Epoxy Resin is a clear, low-viscosity liquid epoxy resin. It can be cured in a wide temperature range to form a high-strength solid bond with excellent moisture resistance. When mixed at the proper ratio with a WEST SYSTEM hardener, it's an excellent adhesive. Formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odour, making it safer to work with than polyester or vinyl ester resins.
West System 206 Slow Hardener
The West System 206 Slow Hardener is a low-viscosity epoxy curing agent for use when extended working time or a longer cure time is needed. It also provides adequate working time at higher shop temperatures. When combined with 105 Epoxy Resin in a five-part epoxy resin to one-part hardener ratio, the cured 105 Epoxy Resin/206 Slow Hardener mixture yields a rigid, high-strength, moisture-resistant solid bond with excellent bonding and barrier coating properties. The mix ratio is 5 parts resin to 1 part hardener by volume. 206 Slow Hardener is not intended for clear coating.
West System 105 Epoxy Resin is designed to wet out and bond to:
- Wood bonding
- Fibreglass
- Reinforcing fabrics
- Composite materials
- Variety of metals
West System 105 Epoxy Resin Project Uses:
- Marine
- Boat Repair
- Adhesion
- Fabrication
- Moulding
- Furniture
- Casting
West System 105 Epoxy Resin Compatible Hardeners:
| Compatible Hardener | Working time (thin film) at 72°F (22°C) | Minimum recommended temperatures |
|---|---|---|
| 205 Fast Hardener | 60 to 70 minutes | 40°F (4°C) |
| 206 Slow Hardener | 90-110 minutes | 60°F (16°C) |
| 207 Special Clear Hardener | 100-200 minutes | 60°F (16°C) |
| 209 Extra Slow Hardener | 3-4 hours | 70˚F (21˚C) |
West System 206 Slow Hardener Project Uses:
- Marine
- Boat Repair
- Bonding
- Fabrication
- Barrier Coating
West System 206 Slow Hardener Cure Time:
- Pot life (100 grams cupful): At 72°F (22°C): 20 to 25 minutes
- Working time (thin film): At 72°F (22°C): 90 to 110 minutes
- Solid state: At 72°F (22°C): 10 to 15 hours
West System 206 Slow Hardener Cure Temp:
- Minimum: At 70°F (21°C)
West System 105 Epoxy Resin Safety Datasheet
West System 105 Epoxy Resin Technical Datasheet
West System 105 Epoxy Resin User Manual and Product Guides
West System 206 Slow Hardener Safety Datasheet
West System 206 Slow Hardener Technical Datasheet
West System 206 Slow Hardener User Manual and Product Guides
Dangerous Goods Shipping
This item is classified as a Dangerous Good and must be processed by a specialised courier. Please therefore allow an extra 1-7 days above the usual shipping time.Please note that Dangerous Goods delivery might not be possible if you live somewhere with alternative mail delivery such as a plane or ferry. Please confirm with your local courier if they can deliver Dangerous Goods.
Some of our product deals are strictly limited - once they're gone, they're gone! Secure yourself this amazing deal while stocks last...by clicking the Add to Order button above.