Eternabond Roof Seal Tape Grey 2in x 50ft Roll (15.2m) - Returned item
Buy Now, Pay Later with
Find Local Store
Tape Roll Contents:
50mm Wide x 15.2 mtrs long.
Colour: Grey
ROOF and LEAK REPAIR TAPE
RoofSeal/OneStep tape is used to seal roof joints (seams) and tears, flashings, copings, skylights, gutters, etc. Perfect for repairing and restoring roofs on mobile homes and RVs. RoofSeal/OneStep seals to itself so it can be cut and folded around an object.For use on virtually all roofs, RoofSeal/OneStep features a UV stable backing. With the exception of surface prep, RoofSeal/ OneStep is a one-step permanent repair system for virtually all roof types, and roof accessories. RoofSeal/ OneStep creates a waterproof, moisture, and air tight barrier with no additional sealing required. RoofSeal/ OneStep remains flexible to temperatures as low as -57 degreesC making it virtually impossible to thermally shock the seam causing a leak.
RoofSeal/OneStep bonds to a wide range of surfaces including difficult roof materials such as: EPDM, TPO, aged PVC, CSPE/Hypalon, CPE , SBS, APP modifieds, asphalt BURs, coal tar BURs, all metal roofs, tiles, shingle, aluminum, Galvanized steel, gypsum board, wood, polyethylene, propylene, polystyrene, fiberglass, brick, concrete, masonry, OSB, etc.
Technical Data
| Adhesion | 9 kilos |
| Application Temperature | 66 degreesC to -29 degreesC ambient |
| Colours | Grey |
| Elongation | >700% +/- 100 |
| Low Temperature Flexibility | 12.7mm radius at -34.4 degreesC |
| Permanence | .001 perms maximum |
| Pliability | No cracks in membrane |
| Shelf Life | Up to 5 years |
| Temperature Flexibility Range | 57 degreesC - >93.3 degreesC |
| Tensile Break PSI | 31 (kpa) |
| Total Thickness | 0.9 mils |
| Water Vapor Test | (ASTME 96B) .005 grms/24 |
NOTE: Values are typical performance properties and characteristics based on laboratory testing. This is intended as a guide for comparison purposes and does not constitute a specification or specification range.
Surface Preparation
Surface must be clean and dry. Moisture, dust, dirt, or other
foreign matter should be removed. Remove oil and grease, etc. with
EternaClean or a non residue cleaner such as acetone or lacquer
thinner. Remove salt and other contaminants.
Application
Install RoofSeal/OneStep over the repair area, removing the release
liner gradually to prevent contamination of the adhesive prior to
application. Rub or roll with pressure using your hand or a steel
roller to activate bonding process. This material may be applied to
clean dry surfaces from 66 degreesC to -29 degreesC ambient.
Treat surface with EternaPrime for installations from 5 degreesC to
-29 degreesC ambient.
visit:
Warranty Note: This item may either require minor repairs, or it may have received cosmetic damage or have other clear, non-critical issues. This may have previously been used by customers but it has been assessed by ourselves or suppliers before sale. This is sold 'as is' - and damage, issues, and any identified marks will be noted on the listing page. It carries a limited 90-day warranty. If the product has unnoted faults, it may be returned for a refund on the original sale price. No exchanges or repairs of products will be undertaken. As these are quick sale, limited offer products, there is no right of return for 'changing your mind'.