Airmar P66-10F Transducer with 10-Pin Adaptor for Northstar

Best performing 600W transom-mount

The Airmar P66 Transom Mount Transducer is no longer available on the market so we've bundled the Airmar P66-10F Transducer for Furuno with Northstar 10-Pin Adaptor to suit your needs. This set comes with the Airmar P66 Transom Mount Transducer with Furuno 10-pin connector and an adapter to connect to a Northstar 10-pin equipment.

The Transducer
The Airmar P66 Transom Mount Transducer is the best performing and most popular transom-mount, TRIDUCER Multisensor in the market for many reasons. Foremost, the 50 kHz & 200 kHz, oversized, ceramic element produces focused beams highlighting detail in the water column and on the bottom surface.

Because of its hydrodynamic shape, water coming off the transom flows smoothly under the transducer face. This results in accurate, high-speed, depth and speed readings and clear display images. Going a step further, the P66 TRIDUCER Multisensor also incorporates a patented noise-suppression system. The result is a 5 to 8 knot (6 to 9 MPH) improvement over standard construction through improved shielding from noise and vibration. The plastic release bracket lets the P66 rotate up to protect the housing if struck by and object while underway.

Great engineering
The Airmar P66 is well engineered inside with a built in shield that reduces the effects of electromagnetic and radio frequency interference. It also comes with a mounting bracket that allows the transducer to be removed without the use of tools that could damage it during storage and trailering. The P66 also features special configurations such as depth, speed, and temperature.

The Adaptor Cable
The Airmar ADAPT-10F-10N Adaptor Cable for Furuno to Northstar is a 1-metre adapter cable made for older transducer designs that have permanently-attached cables and which do not use the Mix and Match system. It allows you to use a Furuno 10-Pin Transducer to connect to a Northstar 10-Pin Fishfinder Unit.

Airmar P66 Transom Mount Transducer Features:

• Depth, Speed, and Temperature
  
• Plastic kick-up bracket
  
• Square four-blade paddlewheel improves linearity, especially at low speeds
  
• Fits transom angles between 2° to 20°
  
• Transducer can be removed from bracket without the use of tools for easy service
  
• 10 metre (33’) cable length standard for most versions
  
• Boat Size: Up to 12m (40’)
  
• RezBoost compatible (for Furuno transducers only)
  
• HDS Gen3 compatible (for Lowrance transducers only)
  

Airmar P66 Transom Mount Transducer Specifications:

• Code: P66-10F
  
• Frequency: 50/200 kHz
  
• Cone: 50 kHz—45°, 200 kHz—11°
  
• RMS Power: 600 W
  
• Maximum Depth Range:
  
• 50 kHz—235 m to 353 m (800’ to 1,200’)
  
• 200 kHz—118 m to 206 m (400’ to 700’)
  
• Connector: 10-pin connector
  
• Sensors: Depth, speed and temperature
  
• Fits: Furuno units with 10-pin connector
  

Airmar ADAPT-10F-10N Adaptor Cable for Furuno to Northstar Features:

• Product code: ADAPT-10F-10N
  
• Adapts Furuno 10-pin transducer (-10F) to Northstar 10-pin equipment (-10N)
  
• Length: 1m