Lowrance Point 1 GPS Antenna

#9012203
Warranty Badge - 12-Months
Hurry! 3 left in stock - Ready to Ship
Why pay $389.99
ONLY $369.00
SAVE $20.99!

Seen a lower price? Ask us to beat it

Add Items to Cart
No payments or interest for 12 months*

Click on the image above to view full picture

Details

Details

Waterproof and easy to mount

The Lowrance Point 1 GPS Antenna is the ideal position and heading device. The Point-1 provides extremely accurate and rapid boat position and speed updates. In addition – unlike other position-only antennas – the Point-1 provides heading for accurate boat direction at any speed and for radar/chart overlay.The Point-1 easily connects to any HDS Gen2, HDS Gen2 Touch or Elite-7 display or any NMEA 2000 network. It is fully waterproof and can be pole or surface mounted on any boat.

Lowrance Point 1 GPS Antenna Features:
  • NMEA 2000 position and heading sensor
  • Supports GPS and GLONASS, Galileo-capable with future software update
  • Supports SBAS including WAAS/EGNOS/MSAS
  • 10 Hz updates for smooth and accurate location
  • Integrated electronic compass provides 10Hz heading for chart stabilisation and radar overlay
  • Accurate course over ground even at low speeds
  • Compact, rugged design for all marine environments and fully waterproof
  • Includes spat/pole mount
  • Not recommended for use with MARPA functionality of radar
  • Easily connects to any HDS Gen2, HDS Gen2 Touch or Elite-7 display or any NMEA 2000 network

Lowrance Point 1 GPS Antenna Specifications:
  • Part: 000-11047-002
  • NMEA 2000 Certified
  • Connectors: NMEA 2000 Micro C
  • Power supply (supply voltage): 9-18v
  • GPS receiver channels: 32
  • Heading accuracy: 3 degrees
  • Horizontal accuracy: 5m
  • Rate of turn: 3 degrees
  • Satellite reacquisition: <5 seconds
  • Start-up time: <3 seconds
  • Cold Start: <50 seconds
  • Pitch/roll angle: @30 degrees 1 grade error
  • Diameter: 90mm
  • Height: 38mm
  • Weight 0.3lbs (approximately)

What's in the Box:
  • Antenna/4' cable
  • T connector
  • Spat/pole mount
  • Mounting hardware
  • Gasket seal
  • Install guide

Note: If you do not have an existing NMEA2000 network you will require an NMEA 2000 Starter Kit to use this product.

Products You Recently Viewed

Recently Viewed