Raymarine Axiom RS150 GPS Antenna Kit

Enhanced accuracy

The Raymarine Axiom RS150 GPS Antenna Kit comes with everything you need to enhance the GPS capability of your Raymarine Axiom Multifunction Display. You'll get the high performance RS150 GPS Sensor that provides fast position updates and enhanced accuracy and the networking cables and adapters that you need to install. No need to look for the components, we've got 'em bundled for you!

Do you require an external GPS antenna or GPS sensor?
Typically, you do not require an external GPS because your Multifunction Display incorporates an integrated GPS receiver. However, there are some circumstances when you may require an external GPS antenna or sensor where the Multifunction Display will not receive GPS signals.

The GPS Sensor
The Raymarine RS150 GPS Sensor is a high performance, 72-channel, remotely mounted GPS sensor for Raymarine navigation systems. The RS150 offers fast 10Hz position updates and enhanced accuracy. It's also a GNSS receiver and supports the GLONASS global navigation satellite system.

The DeviceNet Cable Adapter
In a SeaTalk installation, the Raymarine DeviceNet Adpater Cable adapts SeaTalkng to NMEA2000 network. It's designed for use with E and C-series Widescreen, G-series and ST70 systems.

The Seatalk-NG Starter Kit
The Raymarine Seatalk-NG Starter Kit is the perfect way to get started with your SeaTalk-NG compatible Raymarine product. It's a robust cabbing and connection system compatible with NMEA 2000, built specifically for marine use comprising a powered single backbone with two terminators, one at each end. The 5-way connector forms the start of your SeaTalk-NG backbone and your SeaTalk-NG product is connected via a Spur Cable.

Raymarine RS150 GPS Sensor Features:

• 72-channel GPS receiver
  
• Fast 10Hz position updates
  
• Satellite differential GPS-compatible. Space-Based Augmentation System (SBAS) enabled with WASS, EGNOS, MSAS and GAGAN support
  
• A GNSS receiver with GLONASS compatibility
  
• Low power consumption: 30mA (1 LEN)
  
• SeaTalkng and NMEA2000 compatible (using a device net adapter cable)
  
• Designed for low profile surface mounting or optional pole mounting
  

Raymarine RS150 GPS Sensor Specifications:

• Product Number: E70310
  
• Nominal supply voltage: 12V D.C. Powered by N2K bus
  
• Operating voltage range: 8 - 32V DC
  
• Power consumption: 30 mA max (NMEA LEN = 1)
  
• Operating temperature: -13ºF to 131ºF (-25ºC to +55ºC)
  
• Relative humidity: max 93%
  
• Waterproof: IPx6/7
  
• Supported connection protocols: SeaTalkng - NMEA 2000 (certified) (via DeviceNet adaptor)
  
• Sensitivity: High sensitivity - acquisition down to -163dBm
  
• No. of channels: 72
  
• Positioning System: GPS & GLONASS
  
• Satellite Differential Type: WAAS (United States); EGNOS (Europe); MSAS (Japan); GAGAN (India)
  
• Differential acquisition: Automatic
  
• Position accuracy (95%): <15m
  
• Position accuracy with SDGPS (95%): <5m
  
• Speed accuracy (95%): <0.3kt
  
• Time to first fix from cold start: <2 minutes (< 45 seconds typical)
  
• Time to first fix from hot start: < 8 seconds -72 hour hold up battery allows for hot start
  
• Geodetic Datum: WGS84
  
• Mounting: Surface/rail/pole
  
• What's in the box:
  GPS receiver unit
  Mounting seal
  SeaTalkng spur cable (3 metres)
  Documentation
  M4 x 40mm Threaded studs x 3 (used for surface mounting)
  Finger nuts x 3 (used for surface mounting)
  

Raymarine DeviceNet Adpater Cable Features:

• Female
  
• Part number: A06045
  
• Adapts SeaTalkng to NMEA2000 network
  
• For use with E and C-series Widescreen, G-series and ST70 systems
  
• Length: 0.4m (15.7")
  

Raymarine Seatalk-NG Starter Kit Features:

• Built specifically for marine use
  
• Robust cabbing and connection system
  
• Compatible with NMEA 2000
  
• 5-way connector
  
• Kit includes:
  A06064: SeaTalk-NG 5-way Connector
  A06031: SeaTalk-NG Backbone Terminator (x2)
  A06040: SeaTalk-NG Spur Cable 3m
  A06049: SeaTalk-NG Power Cable