Special Order
NITECORE Rechargeable LED Key-Chain Flashlight 85 Lumen
Deliver to:
Auckland 1026,
NZ
Estimated:
$5.99
2-hour Click & Collect:
(order before 3pm, in-stock products only)
Our Auckland Shop
Free
Buy now, pay later & Finance Options
Find Local Store
Report incorrect product information
Named for its small size, the Thumb Rechargeable LED Key-Chain Flashlight from Nitecore offers a lot of functionality for a light that weighs less than one ounce. It has both white and red LEDs with a top output of 85 lumens, and a head that tilts 120 degrees.
The Thumb will run 45 minutes at high power and 22 hours at low power on a single charge. There's one button for the white LEDs and another for the red. Click the upper switch to activate the white lights and cycle through the high, medium, low and blinking modes: click the lower button to toggle between the red LED's constant-on and blinking. Pressing both buttons at the same time puts the light in lockout mode, so it won't be activated accidentally. To remove lockout mode, press both buttons again.
Nitecore has included over-discharge, overcharge, and short-circuit protections in the Thumb, as well as a power indicator that blinks when the light is charging and shines green when it's charged. The housing is made of durable polycarbonate, and the light's clip allows you to wear it on a belt, a pocket, a pack strap, a hat, etc.
What's in the box:
THUMB
Key Ring
Key Features:
White and red LEDs
Dual pushbutton switching
120 degrees adjustable head
Micro-USB rechargeable
Specifications
Output Low: 2 lumens
Moed: 30 lumens
High: 85 lumens
Battery Built-in 3.7 V, 220 mAh lithium-ion
Runtime Low: 22 h
Moed: 2.25 h
High: 45 min
Housing Polycarbonate
Dimensions 2.9 x 0.9 x 0.6' / 74 x 24 x 16 mm
Weight 0.9 oz / 25 g
The Thumb will run 45 minutes at high power and 22 hours at low power on a single charge. There's one button for the white LEDs and another for the red. Click the upper switch to activate the white lights and cycle through the high, medium, low and blinking modes: click the lower button to toggle between the red LED's constant-on and blinking. Pressing both buttons at the same time puts the light in lockout mode, so it won't be activated accidentally. To remove lockout mode, press both buttons again.
Nitecore has included over-discharge, overcharge, and short-circuit protections in the Thumb, as well as a power indicator that blinks when the light is charging and shines green when it's charged. The housing is made of durable polycarbonate, and the light's clip allows you to wear it on a belt, a pocket, a pack strap, a hat, etc.
What's in the box:
Key Features:
White and red LEDs
Dual pushbutton switching
120 degrees adjustable head
Micro-USB rechargeable
Specifications
Output Low: 2 lumens
Moed: 30 lumens
High: 85 lumens
Battery Built-in 3.7 V, 220 mAh lithium-ion
Runtime Low: 22 h
Moed: 2.25 h
High: 45 min
Housing Polycarbonate
Dimensions 2.9 x 0.9 x 0.6' / 74 x 24 x 16 mm
Weight 0.9 oz / 25 g
Advisory on the images used for this listing: The images used in this product listing are based on information provided to us by our suppliers and may represent a product range, or be for illustration purposes only, and may not be an exact representation of the product, and therefore should be used as a general guide only.
Some of our product deals are strictly limited - once they're gone, they're gone! Secure yourself this amazing deal while stocks last...by clicking the Add to Order button above.