CruzPro HA-60 Digital Heel Angle Round Gauge with NMEA 0183 External Alarm Output

The HA60 Digital Heel Angle Gauge provides a digital display of Heel Angle, Filtered/Damped Heel Angle, Maximum Port Heel Angle and Maximum Starboard Heel Angle.

A high angle alarm can be easily set by the user. When activated, the built-in 85 dB alarm will sound and the display will flash.

Five levels of backlighting can be selected and all set-up, alarm value, maximum port/starboard heel angles and other characteristics are saved in a non-volatile memory.

One of the screw terminals on the rear of the instrument can be programmed as a NMEA 0183 serial data output line or as an external alarm output.

With a press of the button you can display Instantanious Heel Angle, Filtered/Damped Heel Angle, Maximum Port Heel Angle or Maximum Starboard Heel Angle

A filter constant can be selected between a value of zero (no filtering) and 20 (heavy filtering) to slow the display response.

The HA60 draws only 0.018 amps and 5 levels of backlight (including OFF) can be selected from the front panel.

• Operating Voltage: 9.5 - 33.0 VDC
• Current Drain: 0.018 amps nominal
• Display: 4 digit LCD, 5 levels of backlighting
• Data: Heel Angle, Filtered/Damped Heel Angle, Maximum Port Heel angle, Maximum Stbd Heel angle (-40.0 to 40.0) in tenths of a degree)
• External Outputs/Alarms: Output screw terminal user programmable for choice of:
  NMEA 0183 serial data
  External Alarm Output
• Data Output:NMEA 0183 serial 4800 BAUD ($IIXDR sentence).
• Alarms:Built-in 85 dB audible alarm. Settable angle alarm.
• Data Output:NMEA 0183 serial 4800 BAUD ($IIXDR sentence).
• Alarms:Built-in 85 dB audible alarm. Settable high angle alarm.
• Size:2.5inch dia X 4.1inch deep (61mm x 104mm)
• Mounting:2-1/8inch (55mm) round hole