Fynspray Impeller Pump 3/4in
Buy Now, Pay Later with
Find Local Store
Minimum spend $200. Lending criteria, $50 annual Account Fee, fees, Ts&Cs apply. At end of interest free period, Q Mastercard Expired Promotional Rate or Q Card Standard Interest Rate of 28.95% p.a. applies (see Ts&Cs for Q Mastercard Standard Interest Rate). $55 Establishment Fee or $35 Advance Fee applies.
*See here for full T&CFynspray plain bearing impeller pumps are fitted with impellers made from a special neoprene compound which is odorless, tasteless and non-toxic. Pumps run in either direction with equal efficiency and can be mounted at any angle. Impellers and spare parts are always available. All pumps are factory tested and fully guaranteed against faulty workmanship.
Body: Pressure Gun Metal
Impeller: Neoprene
Impeller Diameter: 65mm
Impeller Depth: 50mm
Shaft: Stainless Steel
Shaft Size: 5/8 16mm
Shaft Length: 190mm
Boxed Weight: 2.310kg
Pump Specifications Based on Water
| Flow Rate Liters/Min | |||||
| Bar | 500rpm | 750rpm | 1000rpm | 1500rpm | 1750rpm |
| Open | 18.9 | 30.3 | 36.3 | 49.2 | 52.2 |
| 0.7 | 18.9 | 30.3 | 36.3 | 49.2 | 52.2 |
| 1.0 | 15.1 | 27.3 | 31.8 | 49.2 | 52.2 |
| 1.4 | 13.6 | 22.7 | 30.3 | 49.2 | 52.2 |
| 1 Bar = 1kg/cm2 = 32.8ft head = 14.26psi |
Product Code: WS37
Advisory on the images used for this listing: The images used in this product listing are based on information provided to us by our suppliers and may represent a product range, or be for illustration purposes only, and may not be an exact representation of the product, and therefore should be used as a general guide only.