Rule-Mate Automatic Submersible Bilge Pump 12V
Deliver to:
Auckland 1026,
NZ
Estimated:
$5.99
2-hour Click & Collect:
(order before 3pm, in-stock products only)
Our Auckland Shop
Free
Buy Now, Pay Later with
Find Local Store
Report incorrect product information
Fully automated bilge pump
It's comforting to know that if your boat takes on water, you can pump it out fast. The Rule-Mate Automatic Submersible Bilge Pump provides ultimate pumping performance - designed to help keep your bilge clear of water. This bilge pump operates using an internal level sensor. When water reaches 5cm, the pump will automatically activate, removing water from the bilge. When the water level reaches 0.9cm, the pump will turn off until the water level rises again.
Bilges are not always clean and free from debris. If the level sensor becomes fouled by debris or contaminated water, Rule-Mate's unique back up feature will prevent the pump from entering a run-on condition, protecting the battery while maintaining automatic operation.
Rule-Mate Automatic Submersible Bilge Pump Features:
- Higher flow - optimised impeller to provide up to 10% more flow at the same amperage
- Auto Sense Intelligence - integral water level sensor controls the pump automatically
- Back up Feature - prevents continuous running if sensor is fouled by debris, pump reverts to 2.5 minute cycle mode
- Smaller Footprint - new Rule-Mate is 2/3 the size of existing model
- Built-in Thermal Cut-Off (TCO) - provides added protection for pump and vessel
- Back Flow Prevention - reduces the amount of water left over in the bilge, reducing odour and helping keep your bilge cleaner
- Hidden air vents in the body - helps prevent air locking in challenging plumbing installations and helps with the check valve
- Threaded discharge - easier installation, easier maintenance
Rule-Mate Automatic Submersible Bilge Pump Specifications:
| Model | RM500B | RM800B | RM1100B |
|---|---|---|---|
| Capacity | 500 GPH (1893 LPH) | 800 GPH (3028 LPH) | 1100 GPH (4164 LPH) |
| Volts | 12VDC | 12VDC | 12VDC |
| Fuse Size | 4 | 5 | 7.5 |
| Amps at 12VDC | 1.8 | 3 | 3.8 |
| Amps at 13.6VDC | 2.4 | 3.7 | 4.8 |
| Size (HxWxD) | 114 x 152 x 73mm (4.4 x 6 x 2.9in) | 114 x 152 x 73mm (4.4 x 6 x 2.9in) | 114 x 152 x 73mm (4.4 x 6 x 2.9in) |
| Hose Diameter | 0.75" (19mm) | 0.75" (19mm) | 1" (25mm) and 1.125" (29mm) |
Some of our product deals are strictly limited - once they're gone, they're gone! Secure yourself this amazing deal while stocks last...by clicking the Add to Order button above.