Sikaflex-123 MS Bond Adhesive and Sealant 300ml White

Adhesive and sealant in one

• Concrete
  
• Masonry
  
• Most stones
  
• Ceramic
  
• Wood
  
• Metal
  
• Glass
  
• Plastics such as PVC, PA, PET, EPS/SPS
  

• Bonds well to a variety of substrates without surface pre-treatment
  
• Bonds to damp concrete
  
• Compatible with most substrates, EPS/XPS, building wraps and bitumen
  
• Good mechanical resistance and weathering resistance
  
• Adhesive-sealant with CE marking
  
• A sealant to seal vertical and horizontal joints
  

• Chemical Base: Silane terminated polymer
  
• Packaging: 300ml cartridge
  
• Colour: White
  
• Shelf Life: Twelve (12) months from the date of production when stored as stated.
  Storage Conditions The product must be stored in original, unopened and undamaged sealed
  packaging in dry conditions at temperatures between +5 °C and +25 °C. Always refer to packaging.
  
• Density: ~1.50 kg/l
  

• Shore A Hardness ~36 (after 28 d) (ISO 868)
  
• Tensile Strength ~1.5 N/mm² (ISO 37)
  
• Secant Tensile Modulus ~0.65 N/mm² at 60 % elongation (23°C) (ISO 8339)
  
• Elongation at Break ~250 % (ISO 37)
  
• Elastic Recovery ~75 % (ISO 7389)
  
• Tear Propagation Resistance ~4.5 N/mm (ISO 34)
  
• Service Temperature −50 °C min. / +80 °C max
  
• Joint Design The joint width must be designed to suit the movement capability of the sealant. The joint width shall be ≥ 6 mm and ≤ 20 mm. A width to depth ratio of 2:1 must be maintained. Joints ≤ 10 mm in width are for crack control and therefore non-movement joints.