J-B Weld KwikWood Wood Repair Epoxy Putty 28g

#9035147
Warranty Badge - 12-Months
Ships May 10 - May 21
ONLY $23.99

Seen a lower price? Ask us to beat it

Add Items to Cart
No payments or interest for 12 months*

Click on the image above to view full picture

The item you're looking at is currently unavailable or has limited stock, how about this one instead?
Details

Details

Cut, mix, apply - wood repair in a snap!

The J-B Weld KwikWood Wood Repair Epoxy Putty is a hand-mixable epoxy putty, formulated to repair and rebuild wood. After mixing, it cures to the same density as wood and becomes an integral part of the repair. KwikWood has a 15-25 minute work life. After 60 minutes, it can be machined, drilled, tapped, sanded, filed and painted.

J-B Weld KwikWood Wood Repair Epoxy Putty Features:
  • Strength: 900 PSI
  • Set time: 15-25 minutes
  • Cure time: 1 hour
  • Exterior or interior applications
  • Solvent-free
  • Will not rot, shrink, crack or pull away
  • Cure Colour: Light Tan
  • Volume: 28g

Applications:
  • Dry rot
  • Knot holes
  • Window & door frames
  • Screw holes
  • Insect damage
  • Furniture & carvings
  • Gouges & cracks
  • PVC trim board

Instructions:
  1. Cut: Remove required amount of putty.
  2. Mix: Thoroughly knead putty with fingers to a uniform colour.
  3. Apply: Press putty firmly to the surface to be repaired.

Note: For best results use a detergent or degreaser to first clean the surface, then roughen surface with file or coarse sandpaper to provide the best repair. STAINING: KwikWood accepts stain differently from wood. Some types of pigments and colorants may be added during the mixing step. Always test for stain acceptance, colour match and hardening before application.

Products You Recently Viewed

Recently Viewed