J-B Weld MarineWeld Marine Epoxy

Waterproof when fully cured

Designed for marine applications, the J-B Weld MarineWeld Marine Epoxy is a specially formulated two-part epoxy cold weld system that provides for strong, lasting repairs for bonding different or similar surfaces, such as aluminium, metal, composites, fibreglass and others. MarineWeld sets in 20-25 minutes at room temperature and is fully cured to a dark grey colour in 15-24 hours. Once cured, it can be shaped, tapped, filed, sanded and drilled and will retain its strength above or below the waters’ surface. MarineWeld has a 1:1 mixing ratio and tensile strength of 3960 PSI. So be prepared for any situation, order yours today.

J-B Weld MarineWeld Marine Epoxy Features:

• Ideal for marine applications
  
• Easy to use
  
• Strength: 3960 PSI
  
• Set Time 20-25 Minutes
  
• Cure Time: 15-24 Hours
  
• Cure Colour: Dark Grey
  
• Great for: Boats, personal watercraft, in/outboard engines, deck and hull accessories
  

Instructions:

• Prepare: Clean surface area of dirt, grease, oil, paint or loose debris. For best results use a detergent or degreaser to first clean the surface, then roughen surface with file or coarse sandpaper to provide the best repair.
  
• Mix: Squeeze equal parts from each tube onto a disposable surface and mix thoroughly.
  
• Apply: Apply with appropriate tool in an even coat, weld bead or extruded shape as needed.
  
• Dry: Sets in 20-25 minutes. Cures in 15-24 hours. Allow 4-6 hours before handling and 15 hours (min.) before putting object back in use.
  

Material Safety Data Sheet